Showing posts with label Glossy Accents. Show all posts
Showing posts with label Glossy Accents. Show all posts

Tuesday, June 21, 2011

My Favorite Things

I have a few favorite things that I use in almost every project, layout and card I make! They are:


Inkssentials Glossy Accents
Tim Holtz Distress Ink in Walnut Stain
Tim Holtz Design Ruler
Sakura Quickie Glue Pen
Scor Pal Scor-Tape



Everyone already knows I love my Cricut, and I can't do a project without at least a few cut elements, but this time, I decided to show how using these simple products can make things easier, or prettier.



I started with some paper in my stash. I used two similar patters in different colors, to give a similar effect that can be seen in the photos. To separate and soften the line between the papers, I found a matching ribbon in my stash. I learned from the group that Scor-Tape is easier to use if you put the adhesive on your paper FIRST...then put the ribbon down on top of the adhesive. (It's really tough to keep your ribbon straight if you put the adhesive on the ribbon first...trust me!)

I cut my border from the Martha Steward Holiday Cakes cartridge. I used my Gypsy to weld several of the elements together to make a 12" border. I had to cut the border on my 12x24 mats in order to get a full 12 inch border. I attached the border to the top of each page, and then accented the little holes that didn't really cut out with an Inkssentials White Gel Pen.

The next step was just putting down my pictures on the page. I really like my photos to line up just right - so sometimes, I will use my Tim Holtz ruler to measure out the spaces between my pictures. The grid pattern on the ruler makes it really easy to measure the space between photos.


Another thing that I use a lot of is chipboard. The Grafix Medium Weight Chipboard cuts very nicely on the Cricut, without having to use the deep cut blade. I find that using the blade depth of 6, with high pressure, and two or three cuts, usually gets the cuts I need. I don't recommend cutting very intricate detail items on the chipboard though, unless you have a brand new mat, and a lot of patience! I cut the bracket pieces and the little arrows on the chipboard. The brackets are actually a frame on the Elegant Edges cartridge. I just it in half lengthwise, and used both halves on opposing pages! This part gets really messy, so I suggest scrap paper or some other tossable surface. I inked all over my chipboard pieces using my Distress Ink. In order to get complete coverage, I had to stamp multiple directions, on and off the surface. I didn't make it a solid brown, however, so that it still had a distressed look. Next, I covered each of the chipboard pieces with Glossy Accents. This part is really messy. I used a thin layer of product, making sure to cover all the way to the edges. This product is fairly thick, so it doesn't spread out, as long as the item being glossed stays flat! So, make sure to use enough to cover it entirely, making sure to pop any little air bubbles that may come up. The smaller arrows didn't have any problems. The large bracket pieces, however, curled up with the moisture from the medium as it dried. I used a pin to pop the bubbles, and hold the chipboard down while it was still fairly wet. There was still a fair amount of runoff as it dried because it curled out toward the edges. Allow the product to spread on it's own as it dries, to keep the surface smooth and glassy. If you want to add some distress to this, use your finger or craft blade to spread the product around after it has dried somewhat, but is still tacky.


As the chipboard pieces continued to dry, I began to distress my journal sheet. I used a piece of kraft-colored, lined cardstock to make the journal box. Using a punch, I created the torn notebook edge on top. I roughed up the punched area by gently pushing and folding them to make them uneven. Then, I very lightly crumbled the paper, but not enough to make any hard creases. Finally, I used my Distress Ink pad to stain the outside edges. I used quick, light motions to stain the edges of the paper. This speedy method frequently causes 'mistakes' as the pad slips around the sides, causing the ink to catch on the lightly creased pieces. This gives the paper more character!

After the chipboard embellishments were dry, the larger pieces were still curled up slightly. I used several pieces of Scor-Tape along the back of the chipboard, which helped the chipboard flatten out on the page. To dress these up even further, I used my white gel pen to make some detail that would continue the repeated patterns in the paper and embellishments. I used dots on two of the arrows, similar to the dots in the curved border, as well as the bottom patterned paper. On the brackets, I used some more dots at the points, but then also added some random stitching, to enhance the lines in the paper, ribbon and photos. The stitching is easy to create using the metal edge of the Tim Holtz ruler and a gel pen. The ruler keeps the lines straight, and the metal edge allows the pen to slide easily against the edge of the ruler.
A simple title, welded on my Gypsy, was the final touch, overlapping the embellished chipboard. Any time I have smaller letters to glue, the Sakura Quickie Glue Pen is my go-to adhesive. This pen allows me to get in all the tiny spaces, around all the curves, and even makes a perfect 'dot' of glue to put the dots for 'i' and 'j' letters on the page!

I have to give a shout-out to Pagemaps! I used a sketch from their monthly newsletter from May 2010 as the base for this layout. I hope you get a chance to try out a few of my favorite things!!

Friday, March 25, 2011

Cutters Creek Design Team Spring Blog Hop

Welcome to the Cutters Creek Spring Blog Hop! All of our designers have created some wonderful Spring projects featuring products that you can purchase at the Cutters Creek Store! If you would like to start from the beginning head on over the the Cutters Creek Design Team Blog. Each blog along the way will have a link to the next blog in the chain. Don't forget to make sure you are following each of our personal blogs and leaving comments along the way to enter to win a box full of CHA Swag!!!!


You should have just hopped here from Lori's Blog.

My project is a simple spring-theme card, and what better says "Spring" than the Easter Bunny?!


 
The base of my card is a standard white cardstock, cut at 10" x 6 1/2".  I put a simple fold down the center with my Scor Pal.  I cut a piece of grass-looking paper at 4 1/2" x 6", leaving a quarter inch of white around the outside. 

The title was cut from my Cricut, using a Creative Memories cartridge.  The paper used was from a piece of paper that I found rather ugly as a full size print of purple, pink & green pansies.  However, when cut into the title, the print actually is not quite as obnoxious, and gives the title a soft, colorful feeling!  I adhered the title to a piece of coordinating, textured cardstock from my stash.  Although I used a different brand, the corners can be embellished with any of the We R Memory Keepers Crop-A-Dile Corner Chompers.  I adhered the letters to the cardstock using my favorite glue pen - the Sakura Quickie Glue Roller Pen.

I wanted it to look like my bunny was sitting on a field of flowers.  I happened to have a stamp in my stash that looks like mounds of snow.  I stamped that several times on the bottom of my green paper, using my Memento Tuxedo Black Ink Pad.  On all of the black lines, I dabbed on my Flower Soft Glue, making sure to fill in some extra spaces.  I immediately sprinkled on some Flower Soft Spring Mix, and pressed it into the glue lightly to make sure I had plenty sticking.  Then I tipped my card up and tapped off the excess, saving all the Flower Soft to put back in the pot.  I set the card base off to the side to allow it to dry thoroughly.


Next, I cut my bunny and basket from the Cricut Paper Dolls for Everyday cartridge.  I sized these items on a single mat on my Gypsy, which reduced the number of times I had to put the mat in for cutting, and ensured that everything was sized proportionately.  I wanted to have some of the cut lines in the body and face of the bunny stand out a little more, so I accented them using my Copic Sketch Marker E00 Skin White.  I colored the center of the ears with R20 Blush.  Once again, with my Flower Soft Glue, I dabbed glue all over my bunny, avoiding all the lines I had just highlighted with my Copics.  I sprinkled Flower Soft Diamond Range Polar White all over the bunny, again, pressing it down into the glue lightly, to make sure he was all filled in, fluffy and sparkly!  Since there was a lot of glue used, I had to let him sit several hours to make sure everything dried up nicely before I tried to finish my card!
Of course, the bunny needs to "HOP" off the card, so I adhered him using Glue Dots 1/2 Inch Pop Up Dots.  The basket was also popped up off the page, so that I could add tiny eggs inside of it.  The eggs are actually Twinkly Jewels Birthday Mix, each adhered by a single spot of Glossy Accents.

I hope you enjoyed my little taste of spring!  I would love to hear your thoughts of this card, and let me know what kinds of things remind YOU of spring!

After you leave your comment, hop on back to the Design Team Blog and let us know how much you enjoyed the blog hop!

Here's a list, if you get lost along the way:
Cutters Creek Design Team Blog - http://cutterscreekdesignteam.blogspot.com/
Mandie's Blog - http://mandiesscrappin.blogspot.com/
Kim's Blog - http://kreativekim.blogspot.com/
Mindy's Blog - http://www.scrappyandpiggy.blogspot.com/
Laura's Blog - http://scrapaddict4life.blogspot.com/
Melissa's Blog - http://www.ourmadhouseof4.blogspot.com/
Lori's Blog - http://savingmine.blogspot.com/
Vicki's Blog - http://scrappyleopard.blogspot.com/

Sunday, April 11, 2010

Spring Card

Here's an easy card for a lovely spring thought! It was made from a pre-folded card & envelope set, so I didn't have to fuss with envelope sizing.



First, I stamped Lily from Pink Cats Studios - Billy & Lily Sweethearts on my Prism paper with Memento Ink Tuxedo Black, and colored her with Copics. I cut her out really close with Cutterbee scissors...I love how sharp those little scissors are! Next, I used two embossed borders from the Cuttlebug Emboss A2 Border Frills set. The lace-look border was set at the bottom of the card, and I cut around the embossing to show the curved edges on the bottom. I placed the pink floral border slightly above the bottom, and used a fun, decorative ribbon between the two borders. The ribbon is held in place with Scor-Tape. I tucked Lily in to the top of the pink flower border. To show off the lace border, I used a piece of the same pink cardstock on the INSIDE bottom of the card. I highlighted a few of the flowers in the middle pink border using Flower Soft Summer blend and Flower Soft Glue. The pink hydrangea flowers are set in place with Glossy Accents and a Twinkle Jewel. I have discovered that many 'dimensional' items can be 'glued' in place with Glossy Accents - it sets up hard, so that your embellishment won't fall off! Finally, I cut my title phrase with my Cricut and the Lyrical Letters cartridge. The shadow of this font is clean, and easy to cut very small - this one was cut at 3/4".

Cutters Creek Items Used:
Pink Cats Studios - Billy & Lily Sweethearts
Prism Paper
Memento Ink - Tuxedo Black
Copic Markers
Cutterbee Scissors
Cuttlebug Emboss A2 Border Frills
Scor-Tape
Flower Soft Summer Blend
Flower Soft Glue
Glossy Accents
Twinkle Jewels
Lyrical Letters Cartridge

Sunday, March 14, 2010

Easter Bling - Scrapbook Layout

I was one of the guilty one's...I was waiting on the edge of my seat for Cutters Creek to get the American Crafts glitter paper in stock. As soon as Kim posted the Spring pack, I was online placing that order! When it came, I was AMAZED! This paper is so pretty, so glittery, and so sturdy! It just screamed 'little girls' and I have twin godchildren in Kindergarten that I'm pretty sure will get some very pretty dresses to take pictures in! So, I created a simple, pre-made layout that my niece will be able to quickly add two photos to, and add to her scrapbook!

If you are a member of the Cutter's Creek Yahoo! group, you have probably seen the messages coming through discussing the best settings to use to cut this paper with your Cricut. Start with the following:
Pressure: High
Blade Depth: 6
Multi-Cut: 2
...and be prepared to ADJUST these settings for your Cricut. I had to do multi-cut 3, and still had a few areas that needed cleaned up, however, I probably need to change my blade as it is rather well-used. Intricate cuts, such as the grass on the bottom of my layout, will also require some help from a razor blade, to finish some of the cuts and clean up the edges. Simple shapes, like the egg SVG's, cut cleanly and quickly! I did have one boo-boo, where I put my paper on the mat in the wrong direction (I hate when that happens) - but rather than throw away the bad cut, I placed an egg on the 'edge' and made it look like it belonged there!

Adhering this paper to your layouts does not require any special adhesive. I tried several, to see what had the best success, but there was no single adhesive method that worked better than another. I love Glossy Accents, and turn to that as a regular adhesive when I've failed with other adhesives. I used that for the words "Happy Easter" - and did get some paper buckling under one of the corners...but other than that, all my favorite adhesives worked just fine!

I can't wait to see their pictures pasted in these sheets!


Visit Cutters Creek for all of your crafting needs!

Cartridges Used:
Storybook (Happy Easter)
Locker Talk (Flowers)
Zooballoo (Grass)

SCAL - Egg SVG - bottom (Thanks to Diane from Capadia Designs, see her blog here: http://capadiadesigns.blogspot.com/2010/03/scalloped-easter-egg-card-more-details.html)

Adhesives - Glossy Accents, Glue Glider Pro
Twinkle Jewels (flower centers)

Sunday, March 7, 2010

Rockin' Birthday Card

I didn't have a specific subject in mind for this card. I received a new cartridge from my best gal pal (Thanks Karen!) for my birthday, and I just HAD to try it out! I am now the proud owner of the Cricut Disney Hannah Montana cartridge!

For all of you who think that this cartridge is only for "tweens" - think again! There are only one or two keys that are specific to Hannah Montana. This cartridge has four awesome fonts - two with shadow features, some great musical shapes, a music staff end-cap feature, and pretty butterflies and hearts!

I used the "Daddy's Girl" feature for my main font, font shadow, music notes and guitar, and the "Rock Star" feature for the word "ROCKIN". I ran all of my letters through my Xyron, as I believe that is the easiest way to adhere small fonts. I used a Sakura Glue Pen to adhere the dot to my 'i' and the handle of the guitar. The Sakura pen lets you put adhesive exactly where you need it, which is important for small, intricate parts!

In order to make the word "ROCKIN" really stand out, I covered it in Glossy Accents. I liked the effect so much, that I made the entire face of the guitar glossy as well. The music notes are glitzed up with Stickles 'Star Dust'.

This card is geared towards a girl, with the colors of pink and black, but you could easily change it to a boy by changing all the pink accents to blue or green.

So - all of you girly girls out there - take another look at the Disney Hannah Montana cartridge...I think you'll find a tiara in just your size ;-)