Showing posts with label Twinkle Jewels. Show all posts
Showing posts with label Twinkle Jewels. Show all posts

Friday, March 25, 2011

Cutters Creek Design Team Spring Blog Hop

Welcome to the Cutters Creek Spring Blog Hop! All of our designers have created some wonderful Spring projects featuring products that you can purchase at the Cutters Creek Store! If you would like to start from the beginning head on over the the Cutters Creek Design Team Blog. Each blog along the way will have a link to the next blog in the chain. Don't forget to make sure you are following each of our personal blogs and leaving comments along the way to enter to win a box full of CHA Swag!!!!


You should have just hopped here from Lori's Blog.

My project is a simple spring-theme card, and what better says "Spring" than the Easter Bunny?!


 
The base of my card is a standard white cardstock, cut at 10" x 6 1/2".  I put a simple fold down the center with my Scor Pal.  I cut a piece of grass-looking paper at 4 1/2" x 6", leaving a quarter inch of white around the outside. 

The title was cut from my Cricut, using a Creative Memories cartridge.  The paper used was from a piece of paper that I found rather ugly as a full size print of purple, pink & green pansies.  However, when cut into the title, the print actually is not quite as obnoxious, and gives the title a soft, colorful feeling!  I adhered the title to a piece of coordinating, textured cardstock from my stash.  Although I used a different brand, the corners can be embellished with any of the We R Memory Keepers Crop-A-Dile Corner Chompers.  I adhered the letters to the cardstock using my favorite glue pen - the Sakura Quickie Glue Roller Pen.

I wanted it to look like my bunny was sitting on a field of flowers.  I happened to have a stamp in my stash that looks like mounds of snow.  I stamped that several times on the bottom of my green paper, using my Memento Tuxedo Black Ink Pad.  On all of the black lines, I dabbed on my Flower Soft Glue, making sure to fill in some extra spaces.  I immediately sprinkled on some Flower Soft Spring Mix, and pressed it into the glue lightly to make sure I had plenty sticking.  Then I tipped my card up and tapped off the excess, saving all the Flower Soft to put back in the pot.  I set the card base off to the side to allow it to dry thoroughly.


Next, I cut my bunny and basket from the Cricut Paper Dolls for Everyday cartridge.  I sized these items on a single mat on my Gypsy, which reduced the number of times I had to put the mat in for cutting, and ensured that everything was sized proportionately.  I wanted to have some of the cut lines in the body and face of the bunny stand out a little more, so I accented them using my Copic Sketch Marker E00 Skin White.  I colored the center of the ears with R20 Blush.  Once again, with my Flower Soft Glue, I dabbed glue all over my bunny, avoiding all the lines I had just highlighted with my Copics.  I sprinkled Flower Soft Diamond Range Polar White all over the bunny, again, pressing it down into the glue lightly, to make sure he was all filled in, fluffy and sparkly!  Since there was a lot of glue used, I had to let him sit several hours to make sure everything dried up nicely before I tried to finish my card!
Of course, the bunny needs to "HOP" off the card, so I adhered him using Glue Dots 1/2 Inch Pop Up Dots.  The basket was also popped up off the page, so that I could add tiny eggs inside of it.  The eggs are actually Twinkly Jewels Birthday Mix, each adhered by a single spot of Glossy Accents.

I hope you enjoyed my little taste of spring!  I would love to hear your thoughts of this card, and let me know what kinds of things remind YOU of spring!

After you leave your comment, hop on back to the Design Team Blog and let us know how much you enjoyed the blog hop!

Here's a list, if you get lost along the way:
Cutters Creek Design Team Blog - http://cutterscreekdesignteam.blogspot.com/
Mandie's Blog - http://mandiesscrappin.blogspot.com/
Kim's Blog - http://kreativekim.blogspot.com/
Mindy's Blog - http://www.scrappyandpiggy.blogspot.com/
Laura's Blog - http://scrapaddict4life.blogspot.com/
Melissa's Blog - http://www.ourmadhouseof4.blogspot.com/
Lori's Blog - http://savingmine.blogspot.com/
Vicki's Blog - http://scrappyleopard.blogspot.com/

Sunday, April 11, 2010

Spring Card

Here's an easy card for a lovely spring thought! It was made from a pre-folded card & envelope set, so I didn't have to fuss with envelope sizing.



First, I stamped Lily from Pink Cats Studios - Billy & Lily Sweethearts on my Prism paper with Memento Ink Tuxedo Black, and colored her with Copics. I cut her out really close with Cutterbee scissors...I love how sharp those little scissors are! Next, I used two embossed borders from the Cuttlebug Emboss A2 Border Frills set. The lace-look border was set at the bottom of the card, and I cut around the embossing to show the curved edges on the bottom. I placed the pink floral border slightly above the bottom, and used a fun, decorative ribbon between the two borders. The ribbon is held in place with Scor-Tape. I tucked Lily in to the top of the pink flower border. To show off the lace border, I used a piece of the same pink cardstock on the INSIDE bottom of the card. I highlighted a few of the flowers in the middle pink border using Flower Soft Summer blend and Flower Soft Glue. The pink hydrangea flowers are set in place with Glossy Accents and a Twinkle Jewel. I have discovered that many 'dimensional' items can be 'glued' in place with Glossy Accents - it sets up hard, so that your embellishment won't fall off! Finally, I cut my title phrase with my Cricut and the Lyrical Letters cartridge. The shadow of this font is clean, and easy to cut very small - this one was cut at 3/4".

Cutters Creek Items Used:
Pink Cats Studios - Billy & Lily Sweethearts
Prism Paper
Memento Ink - Tuxedo Black
Copic Markers
Cutterbee Scissors
Cuttlebug Emboss A2 Border Frills
Scor-Tape
Flower Soft Summer Blend
Flower Soft Glue
Glossy Accents
Twinkle Jewels
Lyrical Letters Cartridge

Sunday, March 14, 2010

Easter Bling - Scrapbook Layout

I was one of the guilty one's...I was waiting on the edge of my seat for Cutters Creek to get the American Crafts glitter paper in stock. As soon as Kim posted the Spring pack, I was online placing that order! When it came, I was AMAZED! This paper is so pretty, so glittery, and so sturdy! It just screamed 'little girls' and I have twin godchildren in Kindergarten that I'm pretty sure will get some very pretty dresses to take pictures in! So, I created a simple, pre-made layout that my niece will be able to quickly add two photos to, and add to her scrapbook!

If you are a member of the Cutter's Creek Yahoo! group, you have probably seen the messages coming through discussing the best settings to use to cut this paper with your Cricut. Start with the following:
Pressure: High
Blade Depth: 6
Multi-Cut: 2
...and be prepared to ADJUST these settings for your Cricut. I had to do multi-cut 3, and still had a few areas that needed cleaned up, however, I probably need to change my blade as it is rather well-used. Intricate cuts, such as the grass on the bottom of my layout, will also require some help from a razor blade, to finish some of the cuts and clean up the edges. Simple shapes, like the egg SVG's, cut cleanly and quickly! I did have one boo-boo, where I put my paper on the mat in the wrong direction (I hate when that happens) - but rather than throw away the bad cut, I placed an egg on the 'edge' and made it look like it belonged there!

Adhering this paper to your layouts does not require any special adhesive. I tried several, to see what had the best success, but there was no single adhesive method that worked better than another. I love Glossy Accents, and turn to that as a regular adhesive when I've failed with other adhesives. I used that for the words "Happy Easter" - and did get some paper buckling under one of the corners...but other than that, all my favorite adhesives worked just fine!

I can't wait to see their pictures pasted in these sheets!


Visit Cutters Creek for all of your crafting needs!

Cartridges Used:
Storybook (Happy Easter)
Locker Talk (Flowers)
Zooballoo (Grass)

SCAL - Egg SVG - bottom (Thanks to Diane from Capadia Designs, see her blog here: http://capadiadesigns.blogspot.com/2010/03/scalloped-easter-egg-card-more-details.html)

Adhesives - Glossy Accents, Glue Glider Pro
Twinkle Jewels (flower centers)

Thursday, February 25, 2010

Guest Designer - The Character Cafe

A few weeks ago, I was fortunate enough to win the Blog Hop with the Character Cafe. I had so much fun bouncing around their design team - seeing all the cute new images they have for February. I was able to pick out four really cute digi-stamps - and I cannot wait to start creating with them!

What made it even more special to me, was when Kendra and Kelly asked me to be a Guest Designer for their "Feature Friday"! ME? Really? What an honor! I was happy to take part in their challenge this week - to create a monochromatic card. I had lots of fun coloring with my Copics...and forcing myself to use some goodies from my 'stash'!



For this card, I used my Scor Pal to fold a piece of 8 1/2 x 11 cardstock in half. I then cut TWO frames - one at 5 1/2 x 11 in a contrasting color, and the second at 5 1/4 x 10 3/4 in the metallic paper. I cut out the centers of the frames using my paper trimmer (requires a steady hand!). To add a little texture, I scored a line in the center of the metallic frame using my Scor-Pal again. The frames are attached with pop-up squares to give it extra dimension.

My image is "The Serenade". I colored him with Copics, and then used some Stickles and Spica Glitter Pen to bling him up a little! Using my Creative Memories Cutting System, I cut him out using the Oval cutter, and then cut another contrasting oval with the next size cutting blade. A piece of coordinating ribbon is attached using Scor-Tape - awesome stuff, by the way...and the image is layered on top of that.

The flower is layered using Heidi Swapp and Creative Memories flowers. The butterflies are also Heidi Swapp. I then added a few Twinkle Jewels from Cutter's Creek to give a little extra "BLING" to the card.

Hope you enjoy my card...and check out the other designer's cards at The Character Cafe Blog.